Saturday, July 27, 2013

Tata Showcases Deepwater Pipeline Solutions at OTC

Tata Showcases Deepwater Pipeline Solutions at OTCTata Steel pipe laying. Source: Tata Steel

Tata Steel will demonstrate its ability to deliver pipeline solutions to some of the world's most challenging and complex projects at this year's Offshore Technology Conference (OTC) in Houston May 6-9 2013.

As global demand for key energy sources increases and the search for hydrocarbons takes the industry into deeper and more difficult environments, Tata Steel products will continue to play a vital part in their extraction and distribution offshore, meeting even the most demanding of offshore line pipe requirements.

The company has an extensive track record in every stage of hydrocarbon recovery, from exploration and drilling, oil and gas production and transportation through to refining, processing and developing renewable technologies.

Tata Steel recently completed a $150 million (GBP 100 million) project to provide pipe for the Discovery Producer Services L.L.C. (Discovery) gas pipeline in Keathley Canyon, Gulf of Mexico. Discovery is a 60:40 joint venture between Williams Partners L.P. and DCP Midstream Partners L.P. 

Tata Steel supplied Discovery's Keathley Canyon ConnectorTM with 214 miles (345 kilometers) of 20-inch diameter submerged arc welded line pipe, weighing more than 110,000 metric tonnes, which was manufactured at the company's 42-inch mill in Hartlepool, UK.  The pipe was laid at water depths of up to 7,380 feet (2,250 meters) and is designed to meet the required specification for deepwater conditions.

Richard Broughton, commercial manager for Pipelines & Petrochemical at Tata Steel, said: "Tata Steel applies decades of experience and expert knowledge to deliver strong, reliable and innovative pipeline solutions for challenging and complex projects around the world.

"At OTC this year, we will be showcasing our proven success in providing line pipe for deepwater conditions in the Gulf of Mexico, Brazil, the UKCS and Russia. Recent contracts have been awarded based on our excellent dimensional tolerance control, enabling us to offer enhanced deepwater anti-collapse properties, easy fit-up and fast lay rates."

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

Algeria's El Merk Complex Starts Oil Production After Security Boost

LONDON - El Merk oil complex in Algeria's Sahara, in a rare piece of positive news for the country's hydrocarbons sector after a January terrorist attack.

A terrorist hostage-taking at the In Amenas gas plant in January, which is operated by Sonatrach, the U.K.'s BP PLC and Norway's Statoil ASA, killed 40 oil workers. But the El Merk startup underscores how Algeria, a key oil and gas supplier to Europe, has been able to continue developing its resources after boosting security measures.

Algerian state news agency APS, citing sources close to the operation, said Anadarko and Sonatrach had started pumping from El Merk's fields in March but had only delivered its first oil outside the complex Friday. The complex, which includes a plant to process the hydrocarbons, will produce 127,000 barrels a day of crude oil and condensates by the end of this year, according to APS. Anadarko also said late Monday it had started production from El Merk.

Following the January attack on In Amenas, Anadarko Chief Executive Al Walker said the company had increased security at its operations in Algeria and that it had no intention to leave the country. Other companies, such as French oil and gas major Total SA, also have beefed up their security spending in the region.

Copyright (c) 2013 Dow Jones & Company, Inc.

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

ATR Seeks Potential Acquisitions at OTC

ATR is seeking potential acquisitions at the world's largest oil show in Houston this week at the 2013 Offshore Technology Conference.

Buoyed by recent contract wins and extensions totaling GBP 2 million and strong growth in the last 18 months, the Aberdeen-headquartered business will be seeking out complementary companies to add to its growing capability and fleet of rental equipment.

The new business with Subsea 7, Dong and Marathon has bolstered ATR's first quarter results and the company is on track to reach turnover of GBP 29 million this financial year.

Following investment from NBGI Private Equity, ATR embarked on its ambitious growth strategy with the acquisition of Underwater Engineering Services (UES) in June 2012. This was followed by NBGI's acquisition of Cosalt Offshore earlier this year to combine its technical leadership in offshore lifting and comprehensive offshore inspection, testing and safety service with ATR's highly complementary global equipment rental service offering to the offshore maintenance sector. Planning for the integration of the ATR and Cosalt Offshore businesses is underway and will be complete by the end of 2013.

"We are well on-track with our organic growth strategy and, as the integration of ATR and Cosalt Offshore picks up pace, we are starting to seriously explore further potential acquisitions. OTC is an excellent platform to gather valuable market intelligence, sound out possible acquisition targets, seek out relevant vendors and speak to the corporate finance community," Chief Executive Keith Moorhouse said.

ATR is also planning on doubling last year's GBP 3 million investment in its rental fleet in 2013, with a focus on equipment vital to exploration and production operations offshore.

The market leader in the rental of specialized tools and equipment for the offshore oil and gas industry maintenance market, ATR operates throughout the North Sea and UKCS, and the Caspian region.

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

Tendeka to Grow Presence in North, South American Market

Tendeka, the provider of completions systems and services to the upstream oil and gas industry, announced Tuesday plans to significantly grow its North and South American market presence by promoting its full portfolio of complementary completions products and services in the region.

By opening an office in Canada to directly supply the Canadian market and widening its South American oil and gas market with an increased presence Tendeka will supplement its swellable packer market with its innovative technologies and services that have already added value to client's wells in other regions around the world.

Since its inception in 2009 Tendeka has gone from strength to strength and is a global employer. With 18 regional bases strategically located in key energy hubs, the company is now set to expand further.

Tendeka is a major player in the North American swellable packers market and has supplied packers for use in conventional and unconventional applications in liquid shales including the Bakken, Eagleford, Utica, Niobrara and Permian developments. Tendeka also supplies monitoring, modelling and control systems and services that manage reservoir performance, enhance production and reduce downtime.

Ken Miller, Tendeka vice president of North and South America, said: "We have achieved over 200% top line growth over the last 24 months in our international markets including North America. Swellable packers remain an important part of our North American service offering, particularly to the fraccing market, but we have established that there is a demand for the full range of Tendeka products and services not just in North America but also in Canada and South America.  Our recent contract wins for Cyclic Steam Stimulation monitoring, AICD in SAGD and software for reservoir interpretation are evidence of our increased market penetration in these regions.

"These systems combine to maximise output and efficiency from the reservoir," explained Miller. "We recently strengthened our position in Calgary; initial indications show that our assessment of the market conditions was correct and there is a strong demand for our wider systems offerings, especially in heavy oil operations. Brazil is also a key focus for us where we have recently established solid routes to market and been awarded seven figure contracts. 

Tendeka's CEO Gary Smart said: "Our full portfolio of completions systems and services now includes: leading electronic gauge, distributed and wireless monitoring technologies, to monitor reservoir performance; modeling software, to provide reservoir interpretation and build scenarios; wireless intelligent completions systems, to control reservoir production; sand and inflow control devices, to control reservoir phase filtering; and swellable and mechanical packers, to provide effective zonal isolation. This suite of completions products and services are all industry proven and has been developed to add value to our clients wells through improved production."

Smart continued: "We are keen to explore the wider market opportunities for the whole range of Tendeka systems and services. Our focus on geographic growth will continue to allow us to bring our existing high value portfolio to clients in new territories as well as providing an established route to market for the new product innovations that are currently under development in our research bases in Europe and North America. The oil and gas industry is a challenging one and Tendeka seeks to positively impact our clients' profitability through the implementation of innovative completions systems and services."

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

Balltec Clinches Tubular Bells Gig

Balltec Ltd, Morecambe,UK, has been contracted by Houston Offshore to supply and install 10 off MoorLOK subsea mooring connectors for the Tubular Bells project, located in the Mississippi Canyon area of the Gulf of Mexico.

The contract covers the manufacture of 10 off 15,000kN MoorLOK connectors for the mooring of the Williams floating production system (FPS), Gulfstar GS1 on the Tubular Bells field at a water depth of 4,500 feet. The connectors will be manufactured in accordance with the ABS Guide for the Certification of Offshore Mooring Chain, 2009, and are due to be installed during the first half of 2013.

Sales and Marketing Director at Balltec Ltd Martin Bell said:

"Balltec is proud to have been awarded this significant mooring connector contract. The Tubular Bells project has been under development for some time and we are very much looking forward to working with Houston Offshore Engineering and Williams to play our part in bringing this project to first oil."

Managing Director at Balltec Ltd Russell Benson said:

"The award of the Tubular Bells mooring connector package is another significant contract gain in 2012. With Tubular Bells and several other projects due to be completed next year as well as new products ready to be launched, 2013 is going to be another exciting year for Balltec."

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

UK Energy Secretary Lauds Oil, Gas Sector

UK Secretary of State for Energy and Climate Change Ed Davey said Thursday that he expects oil and gas to remain a vital part of the country's energy mix for decades.

Speaking at an Oil & Gas UK event in London, Davey said:

"As we move to a low carbon economy, oil and gas will remain a vital part of the UK's energy mix for decades to come – providing energy security, jobs and investment.

"I want to pay tribute to the oil and gas industry. Operating in some of the toughest conditions anywhere in the world it spearheads revolutionary technology in offshore exploration and production.

"Alongside the many opportunities the North Sea offers, there are of course challenges too. I believe that the joint work by government and industry … will pay real dividends and ensure continuing investment and success."

Oil & Gas UK Chief Executive Malcolm Webb added:

"We are delighted that the country's senior energy policy maker has today shone the spotlight on the UK's valuable and high technology oil and gas industry. Delegates heard first hand about the government's commitment to promoting investment in the UK's oil and gas reserves, building on the Treasury's new approach on tax and the launch of the long-term industrial strategy for oil and gas."

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

Industry Execs See Higher Costs, Improved Safety with New Regulations

Industry Execs See Higher Costs, Improved Safety with New Regulations

Oil and gas companies will face a tougher regulatory regime in the United States as the U.S. government introduces new rules over the next two years to improve industry safety  following the 2010 Deepwater Horizon incident, according to the findings of a recent survey by GL Noble Denton.

The independent industry technical provider's new report "Reinventing Regulation: The impact of U.S. reform on the oil and gas industry" includes data gathered from over 100 senior oil and gas professionals and in-depth interviews with 10 industry executives, analysts and academics.

Eighty-five percent of survey respondents told GL Noble Denton they expected the U.S. regulatory regime to become much tougher over the next two years. Sixty-one percent said they believed the changing regime would have a somewhat or highly negative effect on their business during the next two years.

Operators face new regulations such as being able to demonstrate they are prepared to deal with a blowout and worst-case discharge. At the same time, they are being forced to revise their approaches to issues such as well design, workplace safety and corporate accountability.

As a result, the oil and gas professionals surveyed anticipate greater administrative workloads and higher compliance costs. Seventy-eight percent expect regulatory changes will lead to greater administrative workload, while 82 percent expected compliance costs to increase. Fifty-seven percent expect the changes to impact their appetite for risk-taking.

A strong regulatory reaction is inevitable following an event such as Macondo and incidents such as Piper Alpha, a North Sea production platform that exploded in 1988, killing 167 men, said Arthur Stoddart, GL Noble Denton's executive vice president for the Americas, in an interview with Rigzone.

“No government could fail to act in the wake of such an incident. The regulations being implemented in the United States present new challenges for oil and gas operators in terms of rising costs and workloads, but these charges are absolutely necessary to improve safety and prevent a future oil spill,” Stoddart said in a statement.

Smaller oil and gas companies are the most likely to face the brunt of increasing compliance costs, burgeoning legal risks and a greater administrative workload. With the U.S. regulatory environment expected to become more stringent over the next two years, oil and gas professionals surveyed anticipate a rise in mergers and acquisitions among oil and gas operators as growing compliance costs speeds up consolidation.

The report, the third by GL Noble Denton which measures industry sentiment, didn't get into specifics on the exact increase of compliance costs, although one executive interviewed anticipated a 10 to 20 percent cost increase. The exact cost may be harder to quantify -  longer times for obtaining drilling permits are expected, which can add to cost. Higher insurance costs also are expected. An operator may experience higher costs if they have to keep a rig longer due to an inspection interrupting drilling. But in other cases, they may not incur any additional cost due to downtime that would have occurred anyway.

While 76 percent of those surveyed prefer a performance or goal-oriented approach to compliance versus the prescriptive approach taken by the U.S. government, these professionals also believe the United States will remain a major destination for oil and gas investment. However, oil and gas industry executives surveyed believe that new safety regulations will improve safety and restore confidence in the industry, the survey found.

Nearly half the executives surveyed expect the new regime to boost safety in the industry. However, only one in 10 of the survey respondents believe the U.S. government is taking the right approach to preparing the oil for new regulations.

While operators have until 2014 to adjust to the new SEMS II regulations, they must still meet inspection requirements under SEMS I by the Nov. 15 deadline. However, GL Noble Denton found the respondents felt their companies were highly or somewhat prepared to meet the new standards.

“There was a bit of a feeling that the authorities could have been clearer, but overall they felt prepared,” said Stoddart.

The impact of new post-Macondo regulations will not only be felt by the U.S.-based oil and gas industry, but regulatory regimes worldwide as countries with existing and emerging oil and gas industries look at the United States and ask them whether they are doing enough, Stoddart told Rigzone.

"It's common for countries to look to mature markets for guidance on rules," Stoddart noted, adding that the UK looked to Texas in the 1970s when North Sea oil and gas exploration began to increase.

While countries may not necessarily being adding specific new rules, the global oil and gas industry is reacting to the changes in the United States by making these new standards global, and using them as a competitive advantage, Stoddart noted.

The UK utilized a prescriptive approach to oil and gas regulations until the Piper Alpha incident in 1988. Like the United States, the UK responded to the incident with significant regulatory changes, including a separation of the management of health, safety and environment issues and production revenues.

The UK also adopted a goal-oriented approach to safety, in which the operator must demonstrate they are meeting their goal of safe, responsible production, but are not told specifically how to meet this goal, said Stoddart, who sees countries with emerging oil and gas industries more likely to adopt a goal-oriented safety regime. GL Noble Denton officials also believe a goal-oriented approach can accommodate changes in technology more easily than a prescriptive approach.

The shortage of skilled technical workers in the industry topped the list of concerns among oil and gas professionals for the first time in the study's three-year history. While skills shortage ranked among the top five concerns, the shortage is now viewed as the biggest barrier to oil and gas industry growth, and the higher competency requirements will exacerbate the shortage.

Both government regulatory agencies and operators are competing to hire technical inspectors from the same limited pool of qualified candidates. GL Noble Denton officials see this trend occurring not only in the United States, but in the UK as well. With oil and gas companies able to pay more than government agencies, the top flier candidates typically get hired by operators, Stoddart noted.

Technical inspectors come from a variety of backgrounds, but are mainly engineers. The shortage of college graduates in engineering and science, technology, engineering and mathematics degrees becoming technical inspectors exacerbating the shortage of workers with this skill set.

The shortage of qualified inspectors is also made worse by the fact that only the most experienced and technically qualified candidates are sought out. Typically, people learn to operate at the edge of their experience, but the new rules prevent that, Stoddart noted. 

Inspectors now have to demonstrate they are fully qualified to perform a job before they are given responsibility. However, they can't get the experience they need unless they are given the chance to actually do the job. The trend of not handing over responsibility unless it's certain a worker can perform a job will limit learning through projects.

The increased liability associated with deepwater projects might be playing a role in why operators are seeking to expand their portfolios to U.S. onshore plays. While there are still risks associated with onshore, Stoddart said the risks are not as likely to damage a company the way that a major incident like Macondo could. Offshore projects are competing with onshore projects not only for capital but for talent as well.

Karen Boman has more than 10 years of experience covering the upstream oil and gas sector. Email Karen at kboman@rigzone.com.

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

BSEE, Coast Guard Enter Agreement to Improve Offshore Oversight

Bureau of Safety and Environmental Enforcement (BSEE) Director James Watson and U.S. Coast Guard Rear Admiral Joseph Servidio announced Thursday at the Offshore Technology Conference in Houston, Texas a new Memorandum of Agreement (MOA) that will strengthen the working relationship between their two agencies on the management of safety and environmental protection responsibilities on the Outer Continental Shelf (OCS).

"Both BSEE and the Coast Guard have specialized expertise in the management of safety and environmental protection programs offshore," said Director Watson. "This agreement with the Coast Guard will bring together resources and expertise from both agencies as we work to ensure both orderly resource development and protection of the human, marine and coastal environments."

"The Coast Guard and BSEE share the goal of keeping our oceans clean and offshore workers safe," said Rear Admiral Servidio. "This agreement solidifies the commitment of each regulatory agency to work across agency boundaries in order to develop a coordinated regulatory approach that promotes safety through the use of safety management systems."

Under the current regulatory regime, both the U.S. Coast Guard and BSEE have shared responsibilities for the regulation of safety management systems on the OCS. This MOA ensures a comprehensive, joint approach to safety and environmental management. Together, BSEE and the Coast Guard will use this agreement to establish a process for the identification of offshore safety and environmental management requirements within the jurisdiction of both agencies and to spur the development of joint policies and guidance. The agreement also provides a mechanism to ensure that all future regulations, policies and guidance are enforced consistently by both agencies.

The MOA is implemented in accordance with an overarching Memorandum of Understanding (MOU) between BSEE and the Coast Guard signed November 27, 2012. The MOU outlined the efforts of the two agencies to closely coordinate responsibilities for regulation and enforcement on the OCS and for the establishment of future focused agreements such as the one announced today. It was the first MOU between the two agencies since BSEE became a bureau in 2011.

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

BSEE, Coast Guard Enter Agreement to Improve Offshore Oversight

Bureau of Safety and Environmental Enforcement (BSEE) Director James Watson and U.S. Coast Guard Rear Admiral Joseph Servidio announced Thursday at the Offshore Technology Conference in Houston, Texas a new Memorandum of Agreement (MOA) that will strengthen the working relationship between their two agencies on the management of safety and environmental protection responsibilities on the Outer Continental Shelf (OCS).

"Both BSEE and the Coast Guard have specialized expertise in the management of safety and environmental protection programs offshore," said Director Watson. "This agreement with the Coast Guard will bring together resources and expertise from both agencies as we work to ensure both orderly resource development and protection of the human, marine and coastal environments."

"The Coast Guard and BSEE share the goal of keeping our oceans clean and offshore workers safe," said Rear Admiral Servidio. "This agreement solidifies the commitment of each regulatory agency to work across agency boundaries in order to develop a coordinated regulatory approach that promotes safety through the use of safety management systems."

Under the current regulatory regime, both the U.S. Coast Guard and BSEE have shared responsibilities for the regulation of safety management systems on the OCS. This MOA ensures a comprehensive, joint approach to safety and environmental management. Together, BSEE and the Coast Guard will use this agreement to establish a process for the identification of offshore safety and environmental management requirements within the jurisdiction of both agencies and to spur the development of joint policies and guidance. The agreement also provides a mechanism to ensure that all future regulations, policies and guidance are enforced consistently by both agencies.

The MOA is implemented in accordance with an overarching Memorandum of Understanding (MOU) between BSEE and the Coast Guard signed November 27, 2012. The MOU outlined the efforts of the two agencies to closely coordinate responsibilities for regulation and enforcement on the OCS and for the establishment of future focused agreements such as the one announced today. It was the first MOU between the two agencies since BSEE became a bureau in 2011.

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here

Viking SeaTech Appoints New GOM Managing Director

Global offshore support specialist Viking SeaTech will officially announce the arrival of Gulf of Mexico Managing Director Tom Bower this week at Offshore Technology Conference (OTC) in Houston. 

Group chief executive Bill Bayliss said: "Tom is a spirited and inspiring leader to steer future American operations.  Formerly of Topaz Energy and Marine, Tom brings almost 30 years of experience to our leadership team. We are recruiting a talented group of highly skilled individuals to support Tom and drive Viking SeaTech's achievable ambitions.  Tom's rich industry knowledge and clout will attract new business and I look forward to the exciting future ahead. I am confident we can maintain the company's success and continue to exceed our customers' expectations stateside.

"Tom will define our strategy to move into the U.S. to strengthen Viking SeaTech's international reputation as a premier supplier of services and solutions. The U.S. market will also be a crucial stepping stone into neighbouring territories as part of group-wide development."

With offices in all of the world's main oil and gas hubs including Aberdeen, Stavanger, Perth, Singapore and Jakarta, Viking SeaTech has a knack of locating emerging business locations and developing their services within the specific marketplace.

Bayliss continued: "We can sense when a potential opportunity for business growth should be translated into reality. Indonesia is fast becoming one of the industry's brightest prospects and we moved swiftly to cultivate our name there. The Jakarta office is an example of our proactive nature and indicates our flexibility in an ever-evolving global energy sphere."

Generated by readers, the comments included herein do not reflect the views and opinions of Rigzone. All comments are subject to editorial review. Off-topic, inappropriate or insulting comments will be removed.

View the original article here